home  |  site map  |  price list  |  dealers  |  contact us  |  about us  |  help
  new products  |  special offers  |  comparisons  |  images

Back to Dental Supplies

MSDS

Ceracoat Debubblizer

PRINTING OPTIONS [help]
Print page as is  
Printable version  
MS Word Document  
Adobe Acrobat PDF file  
[acrobat software required]  

 

MATERIAL SAFETY DATA SHEET

EMDIN INTERNATIONAL CORPORATION
15841 BUSINESS CENTER DRIVE
IRWINDALE, CA 91706, USA
TEL: 626-813-3740    FAX: 626-445-5233

SECTION I

Product

Ceracoat Debubblizers

Date Issued:  20-January-2002

Chemical Family:  Proprietary Formula


SECTION II - HAZARDOUS INGREDIENTS

Materials:  

Water, Alcohol, Glycerine
Additives are proprietary in nature. When used within the normal guidelines specified, they will not impose any health or safety hazard.


SECTION III - PHYSICAL DATA

Solubility in Water:  100 Percent

Specific Gravity:  1.10

Appearance and Odor:  Blue Clear Liquid

Boiling Range: 100 deg. C

Vapor Density: N/A

Evaporation Rate: N/A


SECTION IV - FIRE AND EXPLOSION HAZARD DATA

DOT Category:  N/A

Unusual Fire and Explosion Hazards:  None

Extinguishing Media:  N/A


SECTION V - HEALTH HAZARD DATA

Threshold Limit Value:  N/A

Effects of Overexposure: NONE

Emergency First Aid Procedures: Irrigate eyes with water.


SECTION VI - REACTIVITY DATA

Stability:  Stable

Incompatibility:  None

Hazardous decomposition and hazardous polymerization will not occur.


SECTION VII - SPILL OR LEAK PROCEDURES

Spill Procedure:  Dilute with water and wipe with cloth.

Waste Disposal Method:  Incinerate or as local laws permit.


SECTION VIII - SPECIAL PROTECTION INFORMATION

Ventilation:  Use sufficient ventilation.

Protective Gloves:  Yes

Eye Protection:  Yes

Respiratory Protection:  N/A


SECTION IX - SHIPPING REGULATIONS FOR HAZARDOUS MATERIAL

Consult D.O.T. regulations.


SECTION X - SPECIAL PRECAUTIONS

The product contains alcohols. Take all precautions normally recommended for Isopropyl alcohol. Keep away from heat, sparks, and flames. Store in a cool, dry, well ventilated place away from incompatible materials. Vent container frequently, and more often in warm weather to relieve pressure. Electricall ground all equipment when handling this product and use only non-sparking tools. Keep container tightly closed when not in use. Do not use pressure to empty container. Wash thoroughly after handling. Do not get in eyes, or skin, or on clothing.

Do not cut, grind, weld, or drill on or near this container.

Containers, even those that have been emptied, will retain product residue and vapors. Always obey hazard warnings and handle containers as if they were full.


back to top

 



home  |  site map  |  price list  |  dealers  |  contact us  |  about us |  help
alloys  |  alginate impression materials  |  investments  |  gypsum stones & plasters  |  dental lab supplies
new products  |  product comparisons  |  special offers  |  images

© 2007 emdin international corporation. all rights reserved.