home  |  site map  |  price list  |  dealers  |  contact us  |  about us  |  help
  new products  |  special offers  |  comparisons  |  images

Back to Ortho Investments

MSDS

Castrite-220

PRINTING OPTIONS [help]
Print page as is  
Printable version  
MS Word Document  
Adobe Acrobat PDF file  
[acrobat software required]  


MATERIAL SAFETY DATA SHEET

EMDIN INTERNATIONAL CORPORATION
15841 BUSINESS CENTER DRIVE
IRWINDALE, CA 91706, USA
TEL: 626-813-3740    FAX: 626-445-5233

SECTION I

Product

Castrite 220

Date Issued:  20-January-2002

Chemical Family:  Silicon Dioxide


SECTION II - HAZARDOUS INGREDIENTS

Materials:  

Fillers--Silicon Dioxide
Binders--are proprietary in nature. When used within the normal guidelines specified, they will not impose any health or safety hazard.


SECTION III - PHYSICAL DATA

Solubility in Water:  0.24 Percent

Specific Gravity:  2.65 (H2O=1.0)

Appearance and Odor:  White Odorless Powder


SECTION IV - FIRE AND EXPLOSION HAZARD DATA

Extinguishing Media:  Not Combustible


SECTION V - HEALTH HAZARD DATA

Threshold Limit Value:  10 mg/M3/(% Respirable quartz+2)

Prolonged overexposure above the Threshold Limit Value specified above may cause delayed injury to lungs (silicosis). Silicosis is a form of disabling, progressive and sometimes fatal pulmonary fibrosis characterized by the presence of typical nodulation in the lungs.


SECTION VI - REACTIVITY DATA

Stability:  Stable

Incompatibility:  Hydrofluoric Acid (HF), in which silica will dissove and produce the corrosive gas silicon tetrafluoride.

Hazardous decomposition and hazardous polymerization will not occur.


SECTION VII - SPILL OR LEAK PROCEDURES

Spill Procedure:  Use dustless methods-vacuum and place into closable container for disposal, or flush with water. Do not dry sweep. Wear protective equipment specified below.

Waste Disposal Method:  Dispose in accordance with federal, state, and local regulations.


SECTION VIII - SPECIAL PROTECTION INFORMATION

Ventilation:  Use sufficient local exhaust to reduce the dust to the PEL for respirable quartz.

Protective Gloves:  Optional.

Eye Protection:  Protect from dust particles.

Respiratory Protection:  Use NIOSH approved dust mask respirator under appropriate OSHA standards and regulations.


SECTION IX - SHIPPING REGULATIONS FOR HAZARDOUS MATERIAL

Not D.O.T. regulated.


SECTION X - SPECIAL PRECAUTIONS

Use dustless or wet systems when handling and clean-up so that exposure does not exceed the Threshold Limit Value in Section V above. Practice good housekeeping, maintain ventilation system and post appropriate warning notices where product is used, stored and handled. Do not permit dust to collect on walls, floors, sills, ledges, machinery, or equipment. Maintain, clean and test respirators in accordance with OSHA regulations.


back to top

 



home  |  site map  |  price list  |  dealers  |  contact us  |  about us |  help
alloys  |  alginate impression materials  |  investments  |  gypsum stones & plasters  |  dental lab supplies
new products  |  product comparisons  |  special offers  |  images

© 2007 emdin international corporation. all rights reserved.