|
GENERAL INFORMATION
A fine-powdered impression material,
STARJEL, is a specially formulated heavy body formulation
for improved detail and dimensional stability.
- Right Flow Ability
- High Shelf-stability
- Superior Compressive Strength
- Pleasant Flavors
- Resistence to deformation
- High Quality food grade raw materials
- Compatible with all stones
- Orthodontic, Edentulous, and Partial
Impressions
- Quick 30-40 second mix
- Resistence to gravity flow
INSTRUCTIONS
Tumble powder to fluff it before use.
Scoop powder and tap gently to eliminate voids. For best results,
use 73 F (23 C) water. NOTE: Warmer water will make STARJEL
set faster. Colder water retards setting.
Always add powder to water. Mix for
approximately 40 seconds until a smooth consistency develops.
Load tray and apply to mouth.
Hold tray firmly in place for a full
minute after loss of stickiness. Snap impression from mouth
and rinse it in cool tap water. Pour model immediately. Wait
45 to 60 minutes before removing model for best model surface.
|
PHYSICAL PROPERTIES
Mixing Ratio:
18-20 ml of water to 7 gm
of powder
Mixing time:
40 seconds Gel Time at 23
degree C.: 1.25-1.75 min (Fast Set) 2.00-2.50 min (Regular
Set)
STORAGE CONDITIONS
Recommended storage at temperature
of less than 90 degree F and a relative humidity of less than
50 percent.
PROPORTIONING FOR USE
|
