INSTRUCTIONS

Aluminum Oxide       96% and more
Titanium Oxide         Less than 3%
Iron Oxide                Less than 0.1%
Silicon Dioxide         Less than 0.5 %

This abrasive has been carefully chosen for its superior cutting quality. To mainain its quality as an abrasive use it with clean dry gas or air. Any contact with moisture may cause lumping diminishing the effectiveness and might even clog the orifice of the blasting machine.

Do not use the material more than once because it may be contaminated with foreign particles during the initial use.

Storage and Handling: Store in a cool and dry place. Shake lightly to loosen the material before pouring into the blasting machine.