|
Lab
Model Stone
White &
Yellow
Other custom colors are available as
special orders
Available in regular and high strength mode,
either model stone assures smooth and accurate reproduction
of the impression. Just like our die stone, the model stone
flows smoothly under gentle vibration filling the impression
completely, bubble free. It gets harder faster permitting
fast removal without chipping and breakage.
|
|
Physical Properties
|
|
Water-to-powder ratio
|
30 / 100
|
|
Set Time at 72 deg. F
|
8-12
|
|
Setting Expansion, %
|
|
|
|
0.15% |
|
Compressive Strength,
psi
|
|
|
|
5000
|
|
Dry
|
10000 |
|
|
The fine particles and texture of model
stone assures that smooth mix and flow consistency is immediately
seen as soon the mixing begins. Additionally, the mix consistency
is more stable over a wider range of water-to-powder ratios.
Packaging: Carton
33 lb. (15 kg).
back
to top
|
|
Lab
Model Stone - Hard
White
& Yellow
Other custom colors are available as
special orders
Available in regular and high strength mode,
either model stone assures smooth and accurate reproduction
of the impression. Just like our die stone, the model stone
flows smoothly under gentle vibration filling the impression
completely, bubble free. It gets harder faster permitting
fast removal without chipping and breakage.
|
|
Physical Properties
|
|
Water-to-powder ratio
|
26-27 /100
|
|
Set Time at 72 deg. F
|
8-12
|
|
Setting Expansion, %
|
|
|
|
0.15% |
|
Compressive Strength,
psi
|
|
|
|
8000
|
|
Dry
|
10000 |
|
The fine particles and texture
of model stone assures that smooth mix and flow consistency
is immediately seen as soon the mixing begins. Additionally,
the mix consistency is more stable over a wider range of
water-to-powder ratios.
Packaging: Carton 33 lb.
(15 kg).
back to top
|
|
Dental
Lab Plaster
White
A high quality general purpose dental lab
plaster (Articulation and Flasking) and in general model work.
Available in regular set ( 12 to 15 minutes)
only. Compressive strength over 4,000 psi.
Packaging: Carton 33 lb. (15 kg).
|
|
Physical Properties
|
|
Water-to-powder ratio
|
48 /100
|
|
Set Time at 72 deg. F
|
15 min max
|
|
Setting Expansion, %
|
0.9%
|
|
Compressive Strength,
psi
|
|
|
|
|
|
Dry
|
-
|
|
Gypsum
Stones & Plasters
