CASTRITE-CB is a micro-fine high heat investment which was developed specially for full cast gold crowns and other noble alloys. It has very high thermal expansion which makes it more accurate for noble alloys, under all temperature and humidity conditions, which have lower casting shrinkage.

Due to very high thermal expansion it can also be used for non-precious alloys, specially non-nickel Cobalt-Chromium crown and bridge alloys.

CAUTION: Not recommended for use in ringless or fast burnout procedures. It is absolutely necessary to use very low heating rate.

CASTRITE-CB offers:

1. Long working time
2. Ultra smooth flow / VERY easy mix
3. HIGH thermal expansion for unsurpassed batch to batch consistency
4. Smoothest castings - ABSOLUTELY
5. Reduced finishing time
6. Less use of finishing materials
7. Very little or no rework.

Physical Properties @ 72 F (22 C):
All tests conducted with full strength liquid.
Liquid-to-powder ratio	27 / 100
Working Time (minutes)	4-6
Setting Time (minutes)	15 Max
Expansion:
Setting	1.4 %
Thermal	1.8 %

Packaging